How To Control The Temperature Of The Hydrogenation Reactor?

Mar 12, 2024

Leave a message

The hydrogenation reactor device is designed with a gas feeding unit, a liquid feeding unit, a reactor unit, and a collection unit.

Raw material gas and raw material liquid are mixed and preheated in a certain proportion before entering a fixed bed reactor. The raw material gas and raw material gas are measured by a homogeneous flow controller, and the raw material liquid is measured by a metering pump. The reactor uses a three-stage electric heating furnace for heating. After the reaction products come out of the reactor, gas-liquid separation is carried out first. The liquid material enters the liquid storage tank, and the tail gas is filtered and discharged or connected to an online analyzer. Hydrogenation kettle is a type of reaction kettle used in laboratory experiments, suitable for precise chemical synthesis reaction experiments that simultaneously measure temperature and chemical and chemical reactions by adding inert gas, pressure, conductivity, and redox potential.

This device is a production and testing equipment that integrates a reactor, reaction condition control system, raw material feed, and product output system.

The temperature control of the hydrogenation reactor is controlled by the temperature change of the heat transfer oil inside the jacket of the hydrogenation reactor. The more heat transfer medium in the system, the less effective power is used in the reactor, and the slower the temperature control speed.

The liquid circulation of the entire system of the hydrogenation reactor is closed, and there is an expansion container inside the system. The expansion container and the liquid circulation are insulated and do not participate in the liquid circulation. There is only one mechanical connection. The medium of the hydrogenation reactor is at high or low temperatures, regardless of whether the temperature of the liquid circulation is below 60 degrees.

The entire liquid circulation is a closed system that does not absorb water vapor under low temperature conditions, and does not produce oil mist under high temperature conditions in the hydrogenation reactor. The working temperature range of the heat transfer oil is very wide; The same machine and thermal medium can achieve temperature control of -100 ° C to 200 ° C without using any mechanical or electrical valves in the entire circulation system.

Send Inquiry