The reaction kettle consists of a kettle body, kettle cover, jacket, stirrer, transmission device, shaft seal device, support, etc. When the aspect ratio of the mixing device is large, multiple layers of mixing blades can be used, and it can also be selected according to the user's requirements. A jacket is installed outside the kettle wall, or a heat exchange surface is installed inside the reactor, or heat exchange can be achieved through external circulation. The support seat can be of the support type or ear type. Gear reducers should be used when the speed exceeds 160 revolutions per minute The number of openings, specifications, or other requirements can be designed and manufactured according to user requirements.
1. Packing sealing is usually used under normal or low pressure conditions, with a pressure of less than 2 kilograms.
2. In general, mechanical seals are used for medium pressure or vacuum situations, with a pressure of negative pressure or 4 kilograms.
3. Magnetic sealing will be used under high pressure or high volatility of the medium, usually when the pressure exceeds 14 kilograms. Except for magnetic seals that use water cooling, other sealing forms will increase the cooling water jacket when the temperature exceeds 120 degrees.
Introduction To The Structure Of Stainless Steel Reactor
Send Inquiry